Portable Anchor Installers for small foundations
2,500 ft.-lb. torque capacity hydraulic power drive
Economical manual operation and portability for remote sites, common anchor installations
For most shaft-driven guy anchors and smaller screw foundations, these compact drivers get into areas where large equipment cannot go or is impractical. Operator does not need to resist the torque generated by anchor installation. Countertorque transmits through a torque bar from the drive head to the earth or other restraint. This frees the operator for the task of guiding the anchor path.
Built-in bypass valve limits output to 2,500-ft.-lb. maximum, two-way foot pedal gives operator direct control over drive and reverse directions, hoses (two 12-ft. and two 25-ft.) come with quick couplers for all connections from power supply to foot control to drive head. Pivoting drive-head yoke connects with bent-arm pin to square-tubular torque bar which telescopes from 8 feet to 10 feet as needed.
See the Chance® Civil Construction Installing Tools
for Screw Anchors and Piles catalog for ordering information.
|
All contents Copyright© 2001 -
Hubbell Power Systems, Inc. All rights reserved. Because Hubbell has a policy of
continuous product improvement, we reserve the right to change design specifications
without notice.
Terms of Use | Contact Us | Site Map | A subsidiary of Hubbell Incorporated |