Home › Products › Atlas Resistance Piers › Pre-Drilled Pier

Pre-Drilled Pier

 

Pre-drill PierAtlas Resistance® 2-Piece Predrilled Pier Systems

  • Use for lifts up to 4".
  • Drilled pier access hole required where unsuitable rock is near surface.
  • Use where designer requires penetration into bearing rock.
  • Eccentricity from wall to C-L pipe is 6-3/4".
  • All pre-drilled piers include:
    • Pier bracket.
    • Top pier platform.
    • 14 linear feet of pier pipe (including the starter section).

Order separately: Two pier pins and four anchor bolts per pier, and shims as required.

Specify finish when ordering. See Note 2 at bottom of table for available finishes.

Standard finish is mill steel (Except AP-2-UFPD-3500.165M [PA], which has “Flow Coat” corrosion protection on the pier pipe standard).

Product Information