CHANNEL SLAB PILE CAP ASSEMBLIES

This assembly is used to raise the concrete slab using a screw lift system through the slab. It consists of screw lift slab pile assembly and helical pile.
(Order helical pile separately.)

• Ultimate mechanical strength = 10,000 lbs (44kN)
• Maximum working capacity = 5,000 lbs (22 kN)
• Maximum lifting capacity = 7,500 lbs (33 kN)
• CSP-Pile Shaft Size[*]

STANDARD PILE SIZES:

• CSP-SS125[*] (1-1/4" square shaft)
• CSP-SS1375[*] (1-3/8" square shaft)
• T150-0085 (1-1/2" square shaft) Standard Finish is Hot Dip Galvanized
• CSP-RS2875.165[*] (2-7/8" dia x 0.165" wall round shaft)
• CSP-RS2875.262[*] (2-7/8" dia x 0.262" wall round shaft)

EXAMPLE: CSP-SS125[G]

This is a screw lift slab pile cap assembly to be mounted on over a 1-1/4" square helical pile. The assembly is supplied Hot Dip Galvanized.
(Order helical pile separately)

NOTE: Standard access hole: 6"-8" dia for square shaft piles; 10" dia for round shaft piles. Slab pile assemblies for access holes up to 12" diameter available as Special Order.